After the octocopter which is not really good since the gimbal isn't good enought. I start the Y6 hexa copter project with DJI K-Woong and Cinestar gimbal for my friend who doing professional Air video.
This Y6 has finish build and do a lot of test fly will all FPV for pilot and also fpv for camera man. The camera is control buy the secondary TX. The configuration are:
Motor DT700, Esc Turnigy Plus 25A, props 11x47 APC and carbon props from Himodel.com
5.8Ghz TX/RX x 2 sets for FPV and for camera man. Gimbal control board is Multiwii 2.1 with Gimbal config.
Some assembly pictures and video to shared with
The kit with anti-vibration damper
Almost finish , it is going to use the 11x47 carbon props
Reading on the rcgroups and I give a try on Rabbit FC board. Which is rather good price for FC with all sensor 10DOF, ultrasonic, GPS.
Also the very good kit is sk450 size for quad.
The sk450 kit is a bit heavy but very strong and well design. I am using 4 of sunnysky angle 2212 - 980kv with 4S lipo 1800 and 8x4 GAUI props.
Flight time is about 10 minute with sport fly. The Rabbit board do well with GPs position hold, Return to home and carefree. The height lock is Ok with ultrasonic under 3m and baro for higher.
I am very happy this board. easy setup, easy turnning.
Forgot to take some pics but got video
I also give it a try on my friend Mk octo kit since his kit has faulty ESC, so I replace with rabbit and HK F-30A ESC and Simonk Firmware
It fly well too, this is just a maiden video, will do some turning soon.
The wire need ti trim for cleaner view also. will fix teh Gimbal on this octo for air picture. Since he just doing air photo so I will using this gimbal with a bit modify for tilt camera Damping Pivot Gimbal.
The camera moutn will be using like this for changing the pitch of camera for picture taken.
After the terrible crash it seem will cost to much for fix it, Addy Vo ask me convert the old crashed hexa to new kit and FC: the DJI 550 hexa with naza FC and GPS. All the landing skid and gimbal get to new kit
The naza is real good FC , easy setup and good GPS lock. I took some pic but can remember where to put it.
Just have some test Video of setup GPS, return to home, fail-safe..
The load test with 2 bottle of mineral water of 500ml make load of 1kg. The sunnysky angle is power full. the hexa lift off and fly with 40 to 45% of throttle
This new hexa now in my friend Addy Vo place and waiting for his time to try.
by the time I did some rabbit FC quad and Octo copter also another Y6 copter with DJI K-Woong for air Video. Will update soon....
This build of STO S802 octocopter for my friend airphoto project.
The Octocopter with S802 STO frame and gimbal. Flycontrol is multiwii Flydruino 2.0 mega
Motor DT700 and 30A 400Hz Simonk firmware flashed ESC.
The gimbal come with STO802 kit
and the final with my little boy very excited
Config tool for multiwii 2.0 GUI
beside that some mini quad also build for friends. Building helicopter and multicopter is my big hobby :-))
this is Hobbyking micro PCB quad and nextto it is the hexacopter with 1510 motors and 5x3 props
Two of quad copter with 2212 sunnysky angle motor and 2205 motor
Back form busy time.
It take long time since my last post.
I am so busy last months for doing other project and also make some multicopter for hobby and also for friend's business.
Just want to shared some pics.
The hexa copter with OMGfly kit. Sunnysky angle 2216 motors, 400Hz ESC and multiwii 2.0 Flydruino Mega FC with GPS for my friend in Hue City ( mid of Vietnam) for his air photo hobby.
Some test video for maiden flight
Gimbal control test
and a maiden flight video.
The final pic when it is in my friend placeand ready to fly
The video make by my friend in Hue
and after a fly week with my friend , it get back to me in this form :-(
